To import a routing with operations and resource

To import a routing with operations and resources, you need to populate the following tables:


BOM_OP_ROUTINGS_INTERFACE
BOM_OP_SEQUENCES_INTERFACE
BOM_OP_RESOURCES_INTERFACE


With these three tables, you can create routing header information and assign
operation and resource details.


PROCESS_FLAG
The column PROCESS_FLAG indicates the current state of processing for a row in the interface table. All inserted rows must have the PROCESS_FLAG set to 1.


1 - Pending
2 - Assigned Succeeded
3 - Assign/Validation Failed
4 - Validation Succeeded
7 - Import Succeeded
BOM_OP_ROUTINGS_INTERFACE TABLE.


a. REQUIRED COLUMNS FOR THE BOM_OP_ROUTINGS_INTERFACE TABLE.


You must always enter values for the following required columns when
you insert rows into the BOM_OP_ROUTINGS_INTERFACE table.


PROCESS_FLAG
ASSEMBLY_ITEM_ID
ORGANIZATION_ID
ROUTING_TYPE


If you are creating an alternate routing, you must also enter a value
in the ALTERNATE_ROUTING_DESIGNATOR column.


If the routing you import references a common routing, you must enter a
value in the COMMON_ASSEMBLY_ITEM_ID or the COMMON_ROUTING_SEQUENCE_ID
columns. Routings can only reference common routings that belong to the
same organization. If the routing does not reference a common routing,
the Bill and Routing Interface program defaults the value of the
ROUTING_SEQUENCE_ID for the COMMON_ROUTING_SEQUENCE_ID.


You can specify, in the ROUTING_TYPE column, whether the routing is a
manufacturing routing or an engineering routing. If you do not include
a value for this column, Oracle Bills of Material defaults a value
of 1 (manufacturing), and creates a manufacturing routing. To create
an engineering routing, you must enter a value of 2 (engineering) for
the ROUTING_TYPE column.


For each new row you insert into the BOM_OP_ROUTINGS_INTERFACE table,
you should set the PROCESS_FLAG to 1 (Pending).




b. DERIVED/DEFAULTED VALUES FOR BOM_OP_ROUTINGS_INTERFACE.


The Bill and Routing Interface program derives or defaults most of the
data required to create a manufacturing or engineering routing.
The Bill and Routing Interface program derives or defaults the columns
using the same logic as the Define Routing form or the Define
Engineering Routing form. When you populate a column in the interface
table, the program imports the row with the data you included and does
not default a value.


If you enter a value for the ASSEMBLY_ITEM_NUMBER or COMMON_ITEM_NUMBER
column, you must insert the system item flexfield separator between each
segment of your item number.


INSERT INTO bom_op_routing_interface
(process_flag
,assembly_item_id
,organization_id
,routing_type
,transaction_type
)
VALUES (1
,&inventory_item_id
,&organization_id
,1
,'insert'
);


BOM_OP_SEQUENCES_INTERFACE TABLE.


a. REQUIRED COLUMNS FOR THE BOM_OP_SEQUENCES_INTERFACE TABLE


Each imported record must have a value for the following columns:


PROCESS_FLAG
ROUTING_SEQUENCE_ID
OPERATION_SEQ_NUM
DEPARTMENT_ID
EFFECTIVITY_DATE


You must also specify a value in the ALTERNATE_ROUTING_DESIGNATOR column
if you assign an operation to an alternate routing and have not entered
a value for the ROUTING_SEQUENCE_ID column.


When you insert rows into BOM_OP_SEQUENCES_INTERFACE, you must set the
PROCESS_FLAG to 1 (Pending) for the Bill and Routing Interface program
to process the record.




b. DERIVED/DEFAULTED COLUMN VALUES FOR BOM_OP_SEQUENCES_INTERFACE.


The Bill and Routing Interface program derives or defaults most of the
data required to assign operations to a routing. You can optionally
include a value for derived or defaulted columns, as well as data for
any of the other columns in the interface. The interface program uses
the same logic to derive or default column values in the
BOM_OP_SEQUENCES_INTERFACE table as in the BOM_OP_ROUTINGS_INTERFACE
table. When you populate a column in the interface table, the program
imports the row with the data you included and does not default a
value. However, if you do not enter data in a derived or defaulted
column, the program automatically imports the row with the derived or
defaulted value.


BOM_OP_SEQUENCES_INTERFACE Derived or Defaulted Value
OPERATION_SEQUENCE_ID Sequence BOM_OPERATIONAL_SEQUENCES_S
ROUTING_SEQUENCE_ID From BOM_OP_ROUTINGS_INTERFACE or
BOM_OPERATIONAL_ROUTINGS
LAST_UPDATE_DATE System Date
LAST_UPDATE_BY Userid
CREATION_DATE System Date
CREATED_BY Userid
STANDARD_OPERATION_ID From OPERATION_CODE
DEPARTMENT_ID From DEPARTMENT_CODE
MINIMUM_TRANSFER_QUANTITY 0
COUNT_POINT_TYPE 1
EFFECTIVITY_DATE System Date
BACKFLUSH_FLAG 1
REQUEST_ID From FND_CONCURRENT_REQUESTS
ASSEMBLY_ITEM_ID From ASSEMBLY_ITEM_NUMBER
OPTION_DEPENDENT_FLAG 2
ORGANIZATION_ID From ORGANIZATION_CODE
RESOURCE_ID1 From RESOURCE_CODE1
RESOURCE_ID2 From RESOURCE_CODE2
RESOURCE_ID3 From RESOURCE_CODE3


INSERT INTO bom_op_sequences_interface
(process_flag
,assembly_item_id
,organization_id
,operation_seq_num
,department_id
,effectivity_date
,transaction_type
)
VALUES (1
,&assembly_item_id
,&organization_id
,&operation_seq_num
,&department_id
,&effectivity_date
,'insert'
);

BOM_OP_RESOURCES_INTERFACE TABLE.
a. REQUIRED COLUMNS FOR THE BOM_OP_RESOURCES_INTERFACE TABLE.


You must always enter values for the following required columns when
you insert rows into the BOM_OP_RESOURCES_INTERFACE table:


PROCESS_FLAG
RESOURCE_SEQ_NUM
RESOURCE_ID
OPERATION_SEQUENCE_ID


You must specify a value in the ALTERNATE_ROUTING_DESIGNATOR column if
you assign resources to an alternate routing and have not entered a
value for the ROUTING_SEQUENCE_ID or the OPERATION_SEQUENCE_ID column.


When you insert a row into the BOM_OP_RESOURCES_INTERFACE table, you
must set the PROCESS_FLAG to 1 (Pending) for the Bill and Routing
Interface program to process the record.




b. DERIVED/DEFAULTED COLUMN VALUES FOR BOM_OP_RESOURCES_INTERFACE.


The Bill and Routing Interface program derives or defaults most of the
data required to assign a resource to an operation. You can optionally
include a value for derived or defaulted columns, as well as data for
any of the other columns in the interface. The interface program uses
the same logic to derive or default column values in the
BOM_OP_RESOURCES_INTERFACE table as in the BOM_OP_ROUTINGS_INTERFACE
table and BOM_OP_SEQUENCES_INTERFACE tables. When you populate a
column in the interface table, the program imports the row with the
data you included and does not default a value. However, if you do not
enter data in a derived or defaulted column, the program automatically
imports the row with the derived or defaulted value.


BOM_OP_RESOURCES_INTERFACE Derived or Defaulted Value
OPERATION_SEQUENCE_ID Sequence BOM_OP_SEQUENCES_INTERFACE or
BOM_OPERATION_SEQUENCES_S
RESOURCE_ID From RESOURCE_CODE
ACTIVITY_ID From ACTIVITY
STATDARD_RATE_FLAG From BOM_RESOURCES.STANDARD_RATE_FLAG
ASSIGNED UNITS 1
USAGE_RATE_OR_AMOUNT 1
USAGE_RATE_OR_AMOUNT_INVERSE 1
BASIS_TYPE From BOM_RESOURCES.DEFAULT_BASIS
SCHEDULE_FLAG 2
LAST_UPDATE_DATE System Date
LAST_UPDATED_BY Userid
CREATION_DATE System Date
CREATED_BY Userid
AUTOCHARGE_TYPE From BOM_RESOURCES.AUTOCHARGE_TYPE
REQUEST_ID From FND_CONCURRENT_REQUESTS
ASSEMBLY_ITEM_ID From ASSEMBLY_ITEM_NUMBER
ORGANIZATION_ID From ORGANIZATION_CODE
ROUTING_SEQUENCE_ID From BOM_OP_ROUTINGS_INTERFACE or
BOM_OPERATIONAL_ROUTINGS
INSERT INTO bom_op_resources_interface
(process_flag
,resource_seq_num
,resource_id
,assembly_item_id
,organization_id
,operation_seq_num
,effectivity_date
,transaction_type
)
VALUES (1
,&resource_seq_num
,&resource_id
,&assembly_item_id
,&organization_id
,&operation_seq_num
,&effectivity_date
,'insert'
);

This Article from Uday Somavarapu BlogSpot